11 show channel-group port – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 105
Advertising
CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 105 of 855
5.11 show channel-group port
Use this command to display details of the LACP port of all of the channel groups, or a specified channel
group, or a specified port
Command Syntax
show channel-group port [ifname]
show channel-group channel-group-number port
ifname: interface name
channel-group-number: <1-255>
Command Mode
EXEC
Usage
None
Examples
This example shows how to display details of the LACP port of all of the channel group:
Switch# show channel-group port
Channel-group listing:
----------------------
Group: 1
----------
Ports in the group:
-------------------
Port: eth-0-11
Advertising