CANOGA PERKINS CanogaOS Command Reference - Manual (Page 92)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 92 of 855
Channel number = 1 Protocol = LACP Channel-gorup = agg1
Port index = 91 Mode = Active
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs
A - Device is in active mode P - Device is in passive mode
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
eth-0-12 FA bndl 32768 1 1 0x5b 0x3f
Partner's information:
LACP port Admin Oper Port Port
Port Flags Priority Dev ID key Key Number State
eth-0-12 FA 32768 ca9c.e21d.a301 0 1 0x57 0x3f
Related Commands
None
5.7 show lacp internal
Use this command to display internal information of all of the channel groups, or a specified channel
group.
Command Syntax
show lacp [channel-group-number] internal
channel-group-number: <1-255>
Command Mode
EXEC
Usage
None
Examples
This example shows how to display internal information of all of the channel groups:
Switch# show lacp internal