10 no vpls-peer – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 604
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 604 of 855
30.10 no vpls-peer
Use this command to remove a remote PE from VPLS instance.
Command Syntax
no vpls-peer A.B.C.D
Syntax Description
A.B.C.D
IP address of the peer node to be removed.
Command Mode
VPLS mode
Defaults
This command has no default settings.
Examples
In the following example, the no vpls-peer command is used to remove a remote PE from VPLS
instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)# no vpls-peer 100.100.100.1
Related Commands
vpls-peer
Advertising