73 logging timestamp, 74 show logging – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 799
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 799 of 855
40.73 logging timestamp
To configure the system to apply a time-stamp to debugging messages or system logging messages,
use the logging timestamps command in global configuration mode. To restore the default timestamp
format, use the no form of this command.
Command Syntax
logging timestamp {bsd | date | iso | none | rfc3164 | rfc3339}
no logging timestamp
bsd
BSD
style
(RFC
3164).
date
Date
command
style.
iso
ISO
style
(RFC
3339).
none No
timestamp.
rfc3164
RFC 3164 style (bsd).
rfc3339
RFC 3339 style (iso).
Command Mode
Global configuration
Default
Default timestamp format is BSD.
Usage
Examples
The following is sample output from the logging timestamp command.
Switch(config)# logging timestamp iso
Related Commands
show logging
40.74 show logging
To display the state of system logging (syslog), use the show logging command in privileged EXEC
mode.
Command Syntax
show logging
Command Mode