3 mpls vpls – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 597
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 597 of 855
30.3 mpls vpls
Use this command to create a VPLS instance and come into the VPLS instance mode.
Note:
This command will create a VPLS instance, and come into this instance mode. If
the instance have been created, without inputting the VPLS-ID, it comes into the
instance mode without creating VPLS instance.
Command Syntax
mpls vpls NAME [VPLS-ID]
Syntax Description
NAME
Identifying string for VPLS instance.
VPLS-ID
Identifying value for VPLS instance, the range should be
from 1 to 4294967295.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the mpls vpls command is used to create a VPLS instance and come
into the VPLS instance mode:
Switch # configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)#
Related Commands
no mpls vpls