23 mvr commands, 1 mvr, 2 mvr vlan – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 432
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 432 of 855
23 MVR Commands
23.1 mvr
Use this command to enable or disable MVR
Command Syntax
mvr
no mvr
Command Mode
Global configuration
Usage
This example shows how to enable MVR in the Switch.
Examples
Enable MVR in the Switch, before enable MVR, must disable ip multicast-routing.
Switch(config)#no ip multicast-routing
Switch(config)#mvr
Related Commands
show mvr
23.2 mvr vlan
Use this command to specify the MVR source vlan.
Command Syntax
mvr vlan vlan
no mvr vlan
vlan: <1-4094> vlan id
Command Mode
Global configuration
Usage
This example shows how to configure source vlan of MVR
Examples
configure vlan 2 as source vlan of MVR