CANOGA PERKINS CanogaOS Command Reference - Manual (Page 420)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 420 of 855
Reg ACK recv/Reg NACK recv/Reg pkt sent: 0/0/0
Next stats poll: 20:47:51
Forwarding Counts: Pkt count/Byte count, Other Counts: Wrong If pkts
Fwd msg counts: WRONGVIF/WHOLEPKT recv
Client msg counts: WRONGVIF/WHOLEPKT/Imm Stat/Timed Stat sent
Reg pkt counts: Reg ACK recv/Reg NACK recv/Reg pkt sent
This example shows how to display the max route limit value.
Switch#show ip mroute route-limit
Max Multicast Route Limit Number: 1024
Multicast Route Limit Warning Threshold: 1024
Current Multicast Route Entry Number: 0
This example shows how to display the summary of the ip multicast routing table.
Switch# show ip mroute summary
IP Multicast Routing Table
Flags: I - Immediate Stat, T - Timed Stat, F - Forwarder installed
Timers: Uptime/Stat Expiry
Interface State: Interface (TTL)
Related Commands
show ip igmp groups
21.18 show ip mroute-rpf
Use this command to display rpf information for multicast source.
Command Syntax
show ip mroute-rpf ip_address
ip_address: the source address
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the rpf information for multicast source 10.10.10.11.
Switch# show ip mroute-rpf
RPF information for 1.1.1.1 failed, no route exists
Related Commands