CANOGA PERKINS CanogaOS Command Reference - Manual (Page 355)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 355 of 855
18 VRRP Remote Tracking Commands
18.1 IP SLA MONITOR
To create an IP SLA entry and enter IP SLA monitor configuration mode, use ip sla monitor in
CONFIG mode.
To delete an IP SLA entry, use the no form of this command.
18.1.1.1 Command Syntax
ip sla monitor entrynumber
no ip sla monitor entrynumber
18.1.1.2 Syntax Description
entrynumber Entry number is used to identify ip sla monitor entry, its
range is from 1 to 500;
18.1.1.3 Command Mode
Global configuration
18.1.1.4 Defaults
none
18.1.1.5 Examples
In the following example, the ip sla monitor command is used to create an ip sla monitor entry:
Switch(config)#ip sla monitor 1
Switch(config-ipsla)#
18.1.1.6 Related Commands
Show ip sla monitor
18.2 TYPE ECHO PROTOCOL IPICMPECHO
Defines an Echo operation with icmp packet and enters destination ip address or hostname.
To delete an Echo operation and destination ip address or hostname. use the no form of this
command.
18.2.1.1 Command Syntax
type echo protocol ipIcmpEcho (destination-ip-address|destination-hostname)
no type echo protocol ipIcmpEcho