12 mpls propagate-ttl – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 529
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 529 of 855
26.12 mpls propagate-ttl
Use this command to enable mpls propagate-ttl function.
Command Syntax
(no) mpls propagate-ttl
Syntax Description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
Mpls propagate-ttl is enabled.
Examples
In the following example, the mpls propagate-ttl command is used to enable mpls propagate-ttl
function:
Switch# configure terminal
Switch(config)# mpls propagate-ttl
Related Commands
Advertising