9 ip igmp snooping discard-unknown, 10 ip igmp snooping vlan – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 427
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 427 of 855
None
Examples
This example shows how to set the igmp snooping version 1.
Switch(config)#ip igmp snooping version 1
Related Commands
ip igmp snooping
22.9 ip igmp snooping discard-unknown
Use this command to enable discard-unknown multicast traffic.
To disable discard-unknown multicast traffic, use the no form of this command.
Command Syntax
ip igmp snooping discard-unknown
Command Mode
Global configuration
Defaults
Enable
Usage
None
Examples
This example shows how to enable discard-unknown multicast traffic.
Switch(config)# ip igmp snooping discard-unknown
Related Commands
ip igmp snooping
22.10 ip igmp snooping vlan
Use this command to enable igmp snooping and configure it on vlan.
To remove the settings, use the no form of this command.
Command Syntax
ip igmp snooping vlan <1-4094> [access-group acl | discard-unknown |fast-leave |
last-member-query-interval
<1000-25500>|max-member-num <1-4096>|mrouter interface