51 show class-map, 52 show qos aggregator-policer – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 659
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 659 of 855
32.51 show class-map
Use this command to show class-map information
Command Syntax
show class-map (NAME|)
NAME: Specify a class name, if not specify, all class-map will be shown
Command Mode
Privileged EXEC
Usage
This command is used to show class-map information.
Examples
Switch# show class-map
CLASS-MAP-NAME: cm1
match access-group: acl
CLASS-MAP-NAME: cm2
Switch#
Related Commands
None
32.52 show qos aggregator-policer
Use this command to show aggregator-policer information.
Command Syntax
show qos aggregator-policer (NAME|)
NAME: Specify a aggregator-policer name, if not specify, all aggregator-policer will be shown
Command Mode
Privileged EXEC
Usage
This command is used to show aggregator-policer information.
Examples
Switch# show qos aggregator-policer
AGGREGATOR-POLICER-NAME: agg_plc
CIR 40000 kbps, CBS 40000 bytes, PBS 40000 bytes, color aware mode, drop color is red