CANOGA PERKINS CanogaOS Command Reference - Manual (Page 745)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 745 of 855
Command Mode
Global configuration
Usage
Examples
The following examples configure SSH authentication retry times on your switch:
Switch(config)# ip ssh server authentication-retries 3
Related Commands
show ip ssh server status
40.3 ip ssh server authentication-timeout
To configure Secure Shell (SSH) authentication timeout on your switch, use the ip ssh server
authentication-timeout command in global configuration mode. To restore the default value, use the
no form of this command.
Command Syntax
ip ssh server authentication-timeout seconds
no ip ssh server authentication-timeout
seconds The number of seconds until timeout disconnects, with a maximum of 120 seconds.
Default
The default is 120 seconds.
Command Mode
Global configuration
Usage
Examples
The following examples configure SSH authentication timeout on your switch:
Switch(config)# ip ssh server authentication-timeout 100
Related Commands
show ip ssh server status