33 clear spanning-tree disabled-port, 34 show spanning-tree – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 152
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 152 of 855
Related Commands
7.33 clear spanning-tree disabled-port
Use this command to clear all spanning tree protocol disabled port.
Command Syntax
clear spanning-tree disabled-port
Command Mode
Privileged Exec mode
Default
Usage
Examples
Switch# clear spanning-tree detected protocols bridge 2
Related Commands
7.34 show spanning-tree
Use this command to show the state of the spanning tree. This command only show UP interface’s
state.
Command Syntax
show spanning-tree
Command Mode
Privileged Exec modes
Default
Usage
The following is an output of this command displaying the spanning tree.
Switch#show spanning-tree
Bridge up - Spanning Tree Enabled
Mode - Multiple spanning tree protocol
Path Cost Standard - dot1t
CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768