CANOGA PERKINS CanogaOS Command Reference - Manual (Page 514)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 514 of 855
25.49 targeted-peer-hello-receipt
Use this command to toggle the receipt of targeted hello packets. Use the no parameter to disable
the processing of targeted hello packets.
Command Syntax
(no) targeted-peer-hello-receipt
Syntax description
This command has no arguments and keywords.
Command Mode
Router mode
Defaults
This command has no default settings.
Examples
In the following example, the targeted-peer-hello-receipt command is used to toggle the receipt
of targeted hello packets:
Switch# configure router
Switch(config)# router ldp
Switch(config-router)# targeted-peer-hello-receipt
Related Commands