13 l2protocol-discard stp, 14 show l2protocol-tunnel – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 185
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 185 of 855
no l2protocol-tunnel stp
Command Mode
Interface configuration
Usage
Use this command to enable stp tunnel on port.
Examples
Switch(config-if)# l2protocol-tunnel stp
Related Commands
show l2protocol-tunnel
9.13 l2protocol-discard stp
Use this command to enable stp discard on port.
Command Syntax
l2protocol-discard stp
no l2protocol-discard stp
Command Mode
Interface configuration
Usage
Use this command to enable stp discard on port. If user enable stp discard function, all BPDU packets
received by this port should be discarded.
Examples
Switch(config-if)# l2protocol-discard stp
Related Commands
show l2protocol-tunnel
9.14 show l2protocol-tunnel
Use this display current l2 protocol tunnel configuration.
Command Syntax
show l2protocol-tunnel {interface IFNAME | tunnel-dmac}
Command Mode
Privileged EXEC
Usage