CANOGA PERKINS CanogaOS Command Reference - Manual (Page 844)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 844 of 855
Switch# show snmp-server notify
Notify-name Notify-type
===========================================================
sample trap
Related Commands
44.21 show snmp-server sys-info
To display the system information of SNMP, use the show snmp-server sys-info command in
privileged EXEC mode.
Command Syntax
show snmp-server sys-info
Command Mode
Privileged EXEC
Usage
The system contact can be set by using the snmp-server system-contact command. The system
location can be set by using the snmp-server system-location command.
Examples
The following is sample output from the show snmp-server sys-info command:
Switch# show snmp-server sys-info
Contact: [email protected]
Location: Denvor
Related Commands
44.22 show snmp-server trap-receiver
To display the SNMP traps receiver, use the show snmp-server trap-receiver command in privileged
EXEC mode.
Command Syntax
show snmp-server trap-receiver
Command Mode
Privileged EXEC