15 show track, 16 track – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 365
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 365 of 855
18.14.1.6 Related
Commands
Show track
18.15 SHOW TRACK
To show TRACK entries, use show track in EXEC mode.
18.15.1.1 Command
Syntax
show track (objectid)
18.15.1.2 Syntax
Description
objectid
Object identity is used to identify track object, its range is
from 1 to 500;
18.15.1.3 Command
Mode
Exec mode
18.15.1.4 Defaults
none
18.15.1.5 Examples
In the following example, the show track command is used to show track entries:
Switch#show track
Track 2
Type : Response Time Reporter(RTR) Reachability
Interface : eth-0-2
State : down
Delay up : 30 seconds
Delay down : 30 seconds
18.16 TRACK
To track an object in vrrp process, use the track to command in vrrp mode.
To remove track object in vrrp process, use the no form of this command.
18.16.1.1 Command
Syntax
track objected
no track