CANOGA PERKINS CanogaOS Command Reference - Manual (Page 530)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 530 of 855
26.13 show mpls ftn-database
Use this command to display MPLS Forwarding table for detail.
Comm a nd Syntax
show mpls ftn-database
Syntax description
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls ftn-database command is used to display MPLS
Forwarding table for detail:
Switch# show mpls ftn-database
Codes: > - selected FTN, p - stale FTN, B - BGP FTN, K - CLI FTN,
L - LDP FTN, R - RSVP-TE FTN, S - SNMP FTN, I - IGP-Shortcut,
U - unknown FTN
Code FEC Out-Label Nexthop Out-Intf
K 19.1.1.0/24 0 172.10.1.2 -
Related Commands