4 erps ring level – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 168
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 168 of 855
<1-15>: seconds
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set fail timer interval of erps domain 11 to 5s.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# erps 11 failtime 5
Switch# show erps 11
ERPS domain ID: 11
ERPS domain name: test11
ERPS domain primary control VLAN ID: 16
ERPS domain sub control VLAN ID: 0
ERPS domain hello timer interval: 1 second(s)
ERPS domain fail timer interval: 5 second(s)
Related Commands
None
8.4 erps ring level
Use this command to create/remove an ERPS ring for specific ERPS domain.
Command Syntax
erps ERPS_ID ring RING_ID level {primary | sub}
no erps ERPS_ID ring
ERPS_ID : <1-255> ERPS domain ID
RING_ID : <1-255> ERPS ring ID
level: ring level
primary: primary ring
sub: sub ring
Command Mode
Global configuration
Usage