20 version (rip) – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 239
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 239 of 855
14.20 version (RIP)
To specify a Routing Information Protocol (RIP) version used globally by the router, use the version
command in router configuration mode. To restore the default value, use the no form of this command.
Command Syntax
Version {1 | 2}
no version
1
Specifies RIP Version 1.
2
Specifies RIP Version 2.
Default
The software receives RIP Version 1 and Version 2 packets, but sends only Version 2 packets.
Command Mode
Router configuration
Usage
To specify RIP versions used on an interface basis, use the ip rip receive version and ip rip send
version commands.
Examples
The following example enables the software to send and receive RIP Version 2 packets:
router rip
version 2
Related Commands
ip rip receive version
ip rip send version