CANOGA PERKINS CanogaOS Command Reference - Manual (Page 809)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 809 of 855
Usage
Examples
This is an example of output from the show mac address-table aging-time command:
Switch# show mac address-table ageing-time
MAC address table ageing time is 300 seconds
Related Commands
mac-address-table ageing-time
40.87 show mac address-table
Use the show mac address-table privileged EXEC command to display a specific MAC address table
static and dynamic entry or the MAC address table static and dynamic entries on a specific interface or
VLAN.
Command Syntax
show mac address-table [dynamic | static | multicast] [address mac-addr | interface interface-id |
vlan vlan-id]
dynamic Display the dynamic MAC address.
static Display the static MAC address.
multicast Display the multicast MAC address.
mac-addr Display the specified MAC address.
interface-id Display all MAC addresses on the specified physical port or link
aggregation port.
vlan-id Display all MAC addresses for the specified VLAN. The range is 1 to
4094.
Command Mode
Privileged EXEC
Usage
Examples
This is an example of output from the show mac address-table command:
Switch# show mac address-table
vlan port mac fwd static security
1 eth-0-1 0000.000a.000a 1 0 0
1 eth-0-1 ffff.000a.000a 1 1 0