17 show vrrp – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 366
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 366 of 855
18.16.1.2 Syntax
Description
objectid
Object identity is used to identify track object, its range is
from 1 to 500;
18.16.1.3 Command
Mode
Vrrp mode
18.16.1.4 Defaults
none
18.16.1.5 Examples
In the following example, the track command is used to create an track object:
Switch(config-router)#track 1
18.16.1.6 Related
Commands
Show vrrp
18.17 SHOW VRRP
To show track object in vrrp process, use the show vrrp to command in EXEC mode.
18.17.1.1 Command
Syntax
show vrrp
18.17.1.2 Syntax
Description
None
18.17.1.3 Command
Mode
EXEC mode
18.17.1.4 Defaults
none
18.17.1.5 Examples
In the following example, the show vrrp command is used to show track object in vrrp process:
Switch#show vrrp
VRID <1>
State : Master
Virtual IP : 172.16.10.100(Not IP owner)
Interface : eth-0-2
VMAC : 0000.5e00.0101