10 tar create, 11 tar table – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 733
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 733 of 855
Related Commands
mkdir
dir
39.10 tar create
To create an new tar file in a Flash file system, use the tar create command in Privileged EXEC mode.
Command Syntax
tar create tar-file-name source-directory
tar-file-name
The file name of the new tar file.
source-directory The source directory in flash:
Command Mode
Privileged EXEC
Usage
The source-directory must be a directory.
Examples
The following example creates a tar file named tar1:
Switch# tar create tar1 dir1
Related Commands
tar table
tar xtract
39.11 tar table
To display files in the tar file, use the tar table command in Privileged EXEC mode.
Command Syntax
tar create tar-file-name
tar-file-name
The file name of the tar file.
Command Mode
Privileged EXEC
Usage
The tar-file-name must be a in the flash:.