CANOGA PERKINS CanogaOS Command Reference - Manual (Page 457)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 457 of 855
25.2 clear ldp adjacency
Use this command to clear an adjacency with a specified peer (IP address A.B.C.D), or to clear
all adjacencies for the current LSR.
Command Syntax
clear ldp adjacency {A.B.C.D |*}
Syntax Description
A.B.C.D The address of the adjacent peer.
* Use to clear all adjacencies.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the clear ldp adjacency command is used to clear an adjacency with a
specified peer:
Switch# clear ldp adjacency 123.123.123.33
Related Commands
clear ldp session