CANOGA PERKINS CanogaOS Command Reference - Manual (Page 223)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 223 of 855
Switch# show ip arp
Protocol Address Age (min) Hardware Addr Interface
Internet 1.1.1.1 - 7cb5.0157.0c00 eth-0-1
Internet 2.2.2.1 - 7cb5.0157.0c00 eth-0-2
Internet 3.3.3.1 - 7cb5.0157.0c00 eth-0-3
Internet 10.0.20.1 - 7cb5.0157.0c00 eth-0-10
Internet 10.0.20.254 - 0000.5e00.0101 eth-0-10
Related Commands
arp
13.5 show ip arp summary
To display the total number of Address Resolution Protocol (ARP) table entries, the number of ARP
table entries for each ARP entry mode, and the number of ARP table entries for each interface on the
router, use the show ip arp summary command in privileged EXEC mode.
Command Syntax
show ip arp summary
Command Mode
Privileged EXEC
Usage
Use this command to display high-level statistics about the ARP table entries:
Examples
The following is sample output from the show ip arp summary command:
Switch# show ip arp summary
5 IP ARP entries, with 0 of them incomplete
Related Commands
arp