CANOGA PERKINS CanogaOS Command Reference - Manual (Page 657)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 657 of 855
class we
!
Related Commands
None
32.48 show policy-map
Use this command to show policy-map information.
Command Syntax
show policy-map (NAME|)
show: Show configuration
NAME: Specify a policy-map name
Command Mode
Privileged EXEC
Usage
This command is used to show policy-map information.
Examples
Switch# show policy-map plc_map
POLICY-MAP-NAME: plc_map
State: attached
CLASS-MAP-NAME: cmp1
trust: cos
CIR 5000 kbps, CBS 40000 bytes, EBS 50000 bytes, color aware mode, drop color is red
Related Commands
None
32.49 show policy-map interface
Use this command to show current interface’s policy-map configuration.
Command Syntax
show policy-map interface NAME
Command Mode