32 clear spanning-tree detected protocols – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 151
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 151 of 855
Command Syntax
revision number
no revision number
number
Specify the configuration revision number. The range is 0 to 65535.
Command Mode
mst configuration mode
Default
Default value is 0.
Usage
Examples
Switch# configure terminal
Switch(config)# vlan database
Switch(config-vlan)# vlan 10
Switch(config-vlan)# exit
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# revision 1
Related Commands
7.32 clear spanning-tree detected protocols
Use this command to clear the detected protocols for a specific bridge or interface.
Command Syntax
clear spanning-tree detected protocols [interface interface-id]
interface-id
Specify the name of the interface on which protocols have to be cleared.
Command Mode
Privileged Exec mode
Default
Usage
Examples
Switch# clear spanning-tree detected protocols bridge 2