CANOGA PERKINS CanogaOS Command Reference - Manual (Page 443)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 443 of 855
Switch(config)#no ip pim ignore-rp-set-priority
Related Commands
None
24.9 ip pim jp-timer
Use this command to set the join/prune timer value.
To return the timer to default value, use the no form of this command.
Command Syntax
ip pim jp-timer jp-timer
no ip pim jp-timer
jp-timer : <1-65535> Join/Prune timer value (second)
Defaults
60 seconds
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the join/prune timer value to 100s.
Switch(config)#ip pim jp-timer 100
This example shows how to return the join/prune timer value to default value.
Switch(config)#no ip pim jp-timer
Related Commands
None
24.10 ip pim neighbor-filter
Use this command to add an access-list to filter the neighbor.
To remove this filter, use the no form of this command.
Command Syntax
ip pim neighbor-filter list
list: the name of the access-list