9 show ip arp inspection log – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 695
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 695 of 855
34.9 show ip arp inspection log
To show the status of the log buffer, use the show ip arp inspection log command in privileged EXEC
mode.
Command Syntax
show ip arp inspection log
Command Mode
Privileged EXEC
Usage
To display all entries in the ARP cache, use this command without any arguments or keywords.
Examples
This example shows how to display the current contents of the log buffer before and after the buffers
are cleared:
Switch# show ip arp inspection log
Total Log Buffer Size : 45
Syslog rate : 5 entries per 1 seconds.
No entries in log buffer.
Switch#
Related Commands
arp access-list
Advertising