17 show mpls interface – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 533
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 533 of 855
Syntax description
This command has no arguments or settings.
Command Mode
Privileged EXEC mode
Examples
In the following example, the show mpls ilm-forwarding command is used to display MPLS
Incoming Label Map table:
Switch# show mpls ilm-forwarding
FEC I/O Label Nexthop Out-Intf
5.5.5.0/24 1024/3 3.3.3.2 eth-0-17
Related Commands
show mpls ilm-database
26.17 show mpls interface
Use this command to display interfaces bound to MPLS interface.
Comm
a
nd Syntax
show mpls interface [IFNAME]
Syntax description
Advertising