CANOGA PERKINS CanogaOS Command Reference - Manual (Page 769)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 769 of 855
64000 KKKK
Related Commands
show ntp association
ntp key
40.37 show ntp status
To show the status of the Network Time Protocol (NTP), use the show ntp status command in
privileged EXEC mode.
Command Syntax
show ntp status
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show ntp status command:
Switch# show ntp status
Current NTP status:
============================================================
clock is unsynchronized
stratum: 16
frequency: 0.000 ppm
precision: 2**16
reference time: 00000000.00000000 ( 6:28:16.000 UTC Thu Feb 7 2036)
root delay: 0.000 ms
root dispersion: 2633.790 ms
stability: 0.000 ppm
Related Commands
show ntp association
40.38 show ntp statistics
To show the statistics of the Network Time Protocol (NTP), use the show ntp statistics command in
privileged EXEC mode.