CANOGA PERKINS CanogaOS Command Reference - Manual (Page 88)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 88 of 855
channel group.
Command Syntax
show channel-group [channel-group-number] detail
channel-group-number: <1-255>
Command Mode
EXEC
Usage
None
Examples
This example shows how to display detailed information of all of the channel groups:
Switch# show channel-group detail
Channel-group listing:
----------------------
Group: 1
----------
Group state = L2
Ports: 2 Maxports = 8
Number of ports in bundle: 2 Max Channel-groups = 255
Standby port = NULL
Protocol: LACP
Ports in the group:
-------------------
Port: eth-0-11
------------
Port state = Up In-Bndl
Channel number = 1 Protocol = LACP Channel-gorup = agg1
Port index = 90 Mode = Active
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs
A - Device is in active mode P - Device is in passive mode
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State