CANOGA PERKINS CanogaOS Command Reference - Manual (Page 487)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 487 of 855
25.28 ldp multicast-hellos
Use this command to enable multicast hello exchange on a specified interface.
Use the no parameter to disable multicast hello exchange.
Command Syntax
(no) ldp multicast-hellos
Syntax Description
This command has no arguments or keywords.
Command Mode
Interface mode
Defaults
Disabled
Examples
In the following example, the ldp multicast-hellos command is used to enable multicast hello
exchange on a specified interface:
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# ldp multicast-hellos
Related Commands