14 reset, 15 validate – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 752
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 752 of 855
Command Mode
Rsa key configuration
Usage
Use the key type command to specify the type of the key.
Examples
The following example specifies the key type of KEY1 as public key:
Switch(config)# rsa key KEY1
Switch(config-rsa-key)# key type public
Related Commands
rsa key
40.14 reset
To clear all key configurations, use the reset command in RSA key configuration mode.
Command Syntax
reset
Command Mode
Rsa key configuration
Usage
Use the reset command to clear all key configurations.
Examples
The following example shows to clear all configurations for the key KEY1:
Switch(config)# rsa key KEY1
Switch(config-rsa-key)# reset
Related Commands
rsa key
40.15 validate
To check the validation of the key strings, use the validate command in RSA key configuration mode.