16 displaying related to cfm global information – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 198
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 198 of 855
10.15 Enable cross-checking remote Maintenance End Point
Use this command to enable cross-checking between the list of configured remote maintenance end points
(MEPs) of a domain and MEPs learned through continuity check messages (CCMs).
Command Syntax
ethernet cfm mep crosscheck enable level 7 vlan VLAN_LIST
ethernet cfm mep crosscheck enable vlan VLAN_LIST
ethernet cfm mep crosscheck disable level 7 vlan VLAN_LIST
ethernet cfm mep crosscheck disable vlan VLAN_LIST
Command Mode
Privileged Exec mode
Default
None
Usage
This command is used to enable cross-checking remote MEP.
Examples
Switch#
ethernet cfm mep crosscheck enable level 7 vlan 10,20-30
Related Commands
10.16 Displaying related to CFM global information
Use the command to display information related to global configuration.
Command Syntax
show ethernet cfm
Command Mode
Privileged Exec mode
Default