CANOGA PERKINS CanogaOS Command Reference - Manual (Page 428)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 428 of 855
interface |querier [address address] |querier-timeout <60-300> |query-interval <2-18000>
|query-max-response-time <1-25>|report-suppression | version <1-2>]
<1-4094>: the vlan id
access-group acl: the name of igmp snooping access group on this vlan
discard-unknown: enable discard unknown multicast traffic on this vlan
fast-leave: enable igmp snooping fast leave on this vlan
last-member-query-interval <1000-25500>: the last member query interval on this vlan
max-member-num <1-4096>: the max member number of igmp snooping on this vlan
mrouter interface interface: the mroute interface on this vlan
querier [address address]: the address of querier on this vlan
querier-timeout <60-300>: igmp previous querier timeout on this vlan
query-interval <2-18000>: the igmp query interval on this vlan
query-max-response-time <1-25>: igmp max query response time on this vlan
report-suppression: enable the igmp snooping report suppression no this vlan
version <1-2>: igmp snooping version on this vlan
Command Mode
Global configuration
Usage
None
Examples
This example shows how to enable igmp snooping on vlan 10.
Switch(config)#ip igmp snooping vlan 10
Related Commands
ip igmp snooping
22.11 show ip igmp snooping
Use this command to show the configurations of igmp snooping.
Command Syntax
show ip igmp snooping
Command Mode
EXEC
Usage
None
Examples