CANOGA PERKINS CanogaOS Command Reference - Manual (Page 822)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 822 of 855
Examples
The following is sample output from the show dhcp-server command:
Switch# show dhcp-server
DHCP server group information:
============================================================
group 1 ip address list:
[1] 1.1.1.1
[2] 2.2.2.2
[3] 3.3.3.3
[4] 4.4.4.4
[5] 5.5.5.5
[6] 6.6.6.6
[7] 7.7.7.7
[8] 8.8.8.8
Related Commands
dhcp-server (global)
42.11 show dhcp relay interfaces
To display to which DHCP server group the interface belongs, use the show dhcp relay interfaces
command in privileged EXEC mode.
Command Syntax
show dhcp relay interfaces
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show dhcp relay interfaces command:
Switch# show dhcp relay interfaces
List of DHCP relay enabled interface(s):
DHCP relay service status: enabled
Interface Name DHCP server group
============================================================
eth-0-1 1
Related Commands