3 mpls ftn-entry – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 520
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 520 of 855
26.3 mpls ftn-entry
Use this command to configure one static FTN entry.
Command Syntax
mpls ftn-entry {A.B.C.D M.M.M.M | A.B.C.D/M} OUTLABEL A.B.C.D
Syntax Description
A.B.C.D
M.M.M.M
FEC for FTN entry.
A.B.C.D/M
FEC for FTN entry.
OUTLABEL
Outgoing label, the range should be from 16 to 1048575, or
3(implicit null) or 0(explicit null).
A.B.C.D
Nexthop ip address.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the mpls ftn-entry command is used to configure one static FTN
entry:
Switch# configure terminal
Switch(config)# mpls ftn-entry 200.200.200.0/24 200 12.12.12.2
Related Commands
no mpls ftn-entry