CANOGA PERKINS CanogaOS Command Reference - Manual (Page 827)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 827 of 855
Command Syntax
dns domain domain-name
no dns domain domain-name
domain-name Default domain name used to complete unqualified hostnames.
Default
No default domain name is defined for the DNS view.
Command Mode
Global configuration
Usage
Examples
The following example shows how to specify the default domain for DNS:
Switch(config)# dns domain www.example1.com
Related Commands
show dns
43.3 dns server
To add a name server to the list of Domain Name System (DNS) name servers to be used for a DNS
view to resolve internally generated DNS queries, use the dns server command in global configuration
mode. To remove a DNS name server from the list, use the no form of this command.
Command Syntax
dns server ip-address
no dns server ip-address
ip-address IP address of a DNS name server.
Default
No IP address is explicitly added to the list of resolving name servers for this view, although an IP
address can be added to the list if dynamic name server acquisition is enabled.
Command Mode
Global configuration
Usage
This command can be entered multiple times to specify a maximum of three resolving name servers.