CANOGA PERKINS CanogaOS Command Reference - Manual (Page 522)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 522 of 855
26.5 mpls lsp-tunneling
Use this command to specify one ILM to tunnel.
Command Syntax
mpls lsp-tunneling INLABEL OUTLABEL A.B.C.D/M
Syntax Description
INLABEL Incoming label, the range is 16 to 1048575.
OUTLABEL Outgoing label, the range should be from 16 to 1048575, or
3(implicit null) or 0(explicit null).
A.B.C.D/M Tunnel FEC.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the mpls lsp-tunneling command is used to specify one ILM to
tunnel:
Switch# configure terminal
Switch(config)# mpls lsp-tunneling 100 300 200.200.200.0/24
Related Commands
no mpls lsp-tunneling