CANOGA PERKINS CanogaOS Command Reference - Manual (Page 359)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 359 of 855
18.6.1.5 Examples
In the following example, the vrf command is used to use ip sla monitor entry in VPN:
Switch(config-ipsla)#vrf vpn1
18.6.1.6 Related Commands
Show ip sla monitor
18.7 IP SLA MONITOR SCHEDULE
To enable an IP SLA entry, use ip sla monitor schedule in CONFIG mode.
To disable an IP SLA entry, use the no form of this command.
18.7.1.1 Command Syntax
ip sla monitor schedule entrynumber
no ip sla monitor schedule entrynumber
18.7.1.2 Syntax Description
entrynumber Entry number is used to identify ip sla monitor entry, its
range is from 1 to 500;
18.7.1.3 Command Mode
Global configuration
18.7.1.4 Defaults
none
18.7.1.5 Examples
In the following example, the ip sla monitor schedule command is used to enable an ip sla
monitor entry:
Switch(config)#ip sla monitor schedule 1
18.7.1.6 Related Commands
Show ip sla monitor
18.8 SHOW IP SLA MONITOR
To show IP SLA entries, use show ip sla monitor in EXEC mode.