12 match route-type – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 381
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 381 of 855
19.12 match route-type
Use this command to match specified external route type.
Use the no parameter with this command to turn off the matching.
Use the match route-type external command to match specific external route types. AS-external
LSA is either Type-1 or Type-2. External type-1 matches only Type 1 external routes, and
external type-2 matches only Type 2 external routes.
Note:
This command is valid for OSPF only.
19.12.1.1 Command
Syntax
match route-type external { type-1 | type-2 }
no match route-type external
19.12.1.2 Syntax
Description
type-1
Match OSPF External Type 1 metrics.
type-2
Match OSPF External Type 1 metrics.
19.12.1.3 Command
Mode
Route-map mode
19.12.1.4 Defaults
No match route-type is specified by default.
19.12.1.5 Examples
Switch# configure terminal
Switch(config)# route-map mymap1 permit 10
Switch(config-route-map)# match route-type external type-1
19.12.1.6 Related
Commands
match tag