2 no mpls vpls-vlan – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 596
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 596 of 855
30.2 no mpls vpls-vlan
Use this command to release a block of continuous vlan id which used for vpls function.
Note:
This command will release the block of continuous vlan id.
This command used disable vpls function. when no vpls instance is created, this
command can succeed.
Command Syntax
no mpls vpls-vlan
Syntax Description
This command has no arguments or keywords.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls vpls-vlan command is used to release a block of
continuous vlan id which used for vpls function:
Switch# configure terminal
Switch(config)#no mpls vpls-vlan
Related Commands
mpls vpls-vlan