4 no mpls vpls – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 598
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 598 of 855
30.4 no mpls vpls
Use this command to remove a VPLS instance.
Command Syntax
no mpls vpls NAME
Syntax Description
NAME
Identifying string for VPLS instance.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls vpls command is used to remove a VPLS instance:
Switch# configure terminal
Switch(config)# no mpls vpls vpls1
Related Commands
mpls vpls
Advertising