CANOGA PERKINS CanogaOS Command Reference - Manual (Page 592)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 592 of 855
29.6 no mpls l2-circuit-fib-entry
Use this command to remove a Layer 2 Virtual Circuit FIB entry.
Command Syntax
no mpls l2-circuit-fib-entry NAME
Syntax Description
NAME Identifying string for MPLS Layer-2 Virtual Circuit.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls l2-circuit-fib-entry command is used to remove a Layer
2 Virtual Circuit FIB entry:
Switch# configure terminal
Switch(config)# no mpls l2-circuit-fib-entry pw1
Related Commands
mpls l2-circuit-fib-entry