CANOGA PERKINS CanogaOS Command Reference User Manual
Page 624
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 624 of 855
Examples
In the following example, the traceroute mpls l3vpn command is used to initiate tracing the
route traversed by the specified VPN instance echo request packet in the MPLS cloud.
Switch# traceroute mpls l3vpn vpn1 1.1.1.0/24 source 10.10.10.10 destination
127.0.0.1 dsmap detail flags interval 100 repeat 100 reply-mode timeout 100 ttl
200
Related Commands
ping mpls l3vpn
Advertising