12 vpls-fib-delete – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 606
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 606 of 855
30.12 vpls-fib-delete
Use this command to delete a static PW for a PE in a VPLS instance.
Command Syntax
vpls-fib-delete NAME peer A.B.C.D
Syntax description
NAME
Identifying string for VPLS instance.
A.B.C.D
IP address of PE.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the vpls-fib-delete command is used to delete a static PW for a PE in a
VPLS instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config)# vpls-fib-delete vpls1 peer 100.100.100.1
Related Commands
vpls-fib-add
Advertising