CANOGA PERKINS CanogaOS Command Reference User Manual
Page 528
Advertising
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 528 of 855
Command Syntax
(no) label-switching
Syntax Description
This command has no arguments or keywords.
Command Mode
Interface mode
Defaults
Label switch function is disabled.
Examples
In the following example, the label-switching command is used to enable an interface’s label
switch function:
Switch# configure terminal
Switch(config)# interface eth-0-1
Switch(config-if)# label-switching
Related Commands
Advertising