CANOGA PERKINS CanogaOS Command Reference - Manual (Page 502)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 502 of 855
25.41 show ldp mpls-l2-circuit
Use this command to display summarized Layer-2 Virtual Circuit information.
Command Syntax
show ldp mpls-l2-circuit [detail | Virtual_Circuit_ID]
Syntax description
detail Show detailed information
Virtual_Circuit_ID Specify the MPLS Layer-2 Virtual Circuit by circuit
identifier, the range is 1 to 4294967295.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the show ldp mpls-l2-circuit command is used to display summarized
Layer-2 Virtual Circuit information:
Switch # show ldp mpls-l2-circuit detail
Switch # show ldp mpls-l2-circuit 34 detail
Related Commands