32 router-id – CANOGA PERKINS CanogaOS Command Reference User Manual
Page 491
CanogaOS Command Line Reference
Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches
Page 491 of 855
25.32 router-id
Use this command to set the router-id to the supplied IP address; the router uses this address to
generate the LDP-ID.
Use the no parameter with this command to revert to using the first IP address configured on the
box as the router-id for LDP-ID generation purposes.
Command Syntax
(no) router-id
A.B.C.D
Syntax description
A.B.C.D
The new IP address.
Command Mode
Router mode
Defaults
This command has no default settings.
Examples
In the following example, the router-id command is used to set the router-id to the supplied IP
address:
Switch# configure router
Switch(config)# router ldp
Switch(config-router)# router-id 123.123.123.8
Related Commands